Balanced Doors | Stanley Access

STANLEY Rush Balanced Doors

Assistance in Wind Tunnel or Stack Effects

- Conventional hinged doors require more force or strength to open.
- Balanced door design uses the differential of interior and exterior air pressure to facilitate opening of the door. The imposed forces, whether wind or stack draft suction, are balanced on each side of the pivot in a 'see-saw' fashion.
- Conventional hinged doors require more force or strength to open.
- Balanced door design uses the differential of interior and exterior air pressure to facilitate opening of the door. The imposed forces, whether wind or stack draft suction, are balanced on each side of the pivot in a 'see-saw' fashion.

A Pristine Look for Your Iconic Entryway

- Snap on covers with no visible screws.
- Concealed closer arm and track linkage.
- Snap on covers with no visible screws.
- Concealed closer arm and track linkage.

STANDARD

Stainless Steel or Aluminum
Pivot Points In Arms And Door Points Are Self-Aligning Ball And Needle Combination Bearings

Door Bumper Spring Loaded In Track
Tempered Glass
Heavy Extruded Corner And Bearing Bracket

OPTIONAL

Exposed Shaft Design Doors
Special Hardware Requires Coordination With Balanced Hardware
Overhead Concealed STANLEY Magic-Force Automatic Operator
All Glass Or Framed Doors

All door packages are custom manufactured to fit your job requirements up to ¼” increments.
For sizes greater or smaller than typical, contact STANLEY Rush: 888-301-5407 | e-mail estimating | e-mail sales | e-mail general questions