Dura-Shield Blast
Dura-Shield Blast
Designed and Tested to Department of Defense Anti-Terrorism Standards.
The Dura-Shield Blast Doors have been developed in partnership with Insulgard® Security Products to provide protection from BLAST attacks.
Product Details
- Door panels constructed of heavy-duty aluminum-extruded 2 ½" x 6" (63.5mm x 152.4mm) framing
- Heavy-duty aluminum-extruded framing can accommodate the widest range of glazing options in the industry
- Door stiles assembled with threaded rods and clips + wall thickness of aluminum stiles and rails twice industry standard for unparalleled strength
- Configurable for integration with building security systems
- UL-Listed battery backup and fire alarm integration for emergency egress
- Solenoid Lock – Electronic locking System
- Dual motor drive system
- Rotary Key Switch
- Hydraulic Closer
| Design |
Bi-Part, Single Slide |
| Breakout | None |
| Finish | Clear or Dark Bronze Anodized | Special Finishes Available |
| Header Size |
11” (279mm) High x 8 7/8” (227mm) Deep |
| Bottom Rail | Nominal 10" |
| Maximum Sizes | Single Slide: 10’ 0” (3.0m) x 8’ 0“ (2.4m) | Bi-Part: 16’ 7” (5.08m) x 8’ 0“ (2.4m) |
| Clear Door Opening |
Bipart: 68 5/8” | Single Slide 36 1/16” to 42 1/16” |
| Power Required | 120 VAC, 50/60 HZ, 5 Amps Minimum | Uninterrupted Power Supply | Up to 1.5 Hours Supplemental Power |
| Drive System | Two 1/4 HP DC Motors, Gear Drive, Toothed belt |
| Controls | Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro |
| Controller | High Resolution iQ Controller, Microprocessor Based, Safety Logic, Fire Alarm Interface, Position Encoder, Programmable Interface |
| Activation/Safety Sensors | 2 Combined Activation/Safety Sensors + Doorway Holding Beams for added safety | OPTION: Wallplates, Radio Control, Touchless Activation, Badge Access |
| Locking | Solenoid Lock (Electronic Locking System), Rotary Key Switch |
| Temperature Ratings | -30F to 130F |
| Codes & Standards | UL®, cUL, ANSI A156.10*, ASTM F2927, ASTM Category III, ASTM Glazing Hazard H2, GSA Classification C Performance 3a or 3b, UFC 4-010-01 – Department of Defense Code |
*Due to extreme forces during a blast event, our Blast product complies with all facets of ANSI 156.10 except emergency egress breakaway. Please consider alternate egress routes when designing your life safety egress plan. Final use of this project must be approved by local Fire Marshall.
*All Specifications are subject to change. Please contact your local sales representative to ensure accuracy.
