The Dura-Storm™ 2000/3000 Hurricane Series is tested to meet the State of Florida’s most stringent building design & code requirements for hurricane force winds and flying debris. The Dura-Storm is trusted as a buildings first line of defense from storms by reducing air infiltration, withstanding high wind pressure and maximizing forced entry resistance. Areas that experience high winds but lack a hurricane specific code can benefit by improving building integrity. 


  • Full Breakout (3000 only) allows all door panels to be broken out at any point of travel. Video.
  • Partial Breakout (2000 only) allows only sliding panel to break out at any point of travel. Video.
  • All welded panel design
  • Wind resistant dampers reduce the potential for panel damage caused by wind gusts when panels are broken out
  • Reinforced top and bottom pivots
  • Top and bottom panel ball detents
  • Heavy duty security hooks keep the panels on track under high wind load pressure
  • Impact glass is used on “impact rated” products to mitigate potential hazards of flying debris and keeps the interior safe
  • Armored strike utilizes an eight laminate hook with bolt and stile reinforcement for enhanced security
  • Rated for installation in to wood, steel, concrete or aluminum substrates
  • Multi point bolt lockingyellow-line-with-arrow.png


2000/3000 Dura-Storm Bi-Parting and Single Slide Impact Series

  • Narrow / Medium Stiles: +/-  75 PSF
  • Bi-part: 168” x 96”
  • Single Slide: 108” x 96”
  • Glass: 9/16”

2000/3000 Dura-Storm Bi-Parting Impact Series

  • Medium Stiles - Steel Reinforced: +/- 55 PSF
  • Bi-part: 192” x 104” / 179.5” x 128”
  • Glass: 9/16

2000/3000  Dura-Storm Bi-Parting and Single Slide with Transom Option Non-Impact Series

  • Narrow / Medium Stiles: +/- 55 PSF
  • Bi-part: 168” x 96” (w/o transom) or 123.75” (w/ transom)
  • Single Slide with Optional Transom: 108” x 96” (w/o transom) or 123.75” (w/ transom)
  • Glass: ¼”, 1”

All door packages are custom manufactured to fit your job requirements up to ¼” increments.  For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

Hurricane Rated

Dura-Storm Impact Architectural Specifications (3 Part)

Dura-Storm Non-Impact Architectural Specifications (3 Part)

DESIGN: Single Slide or Bi-part
BREAKOUT: SX Panel on the 2000, SX and SO panels on the 3000
FINISH: Clear or Dark Bronze Anodized | OPTION: Special Finishes Available
TYPICAL HEIGHT: 7’-8” (2.3m)
CLEAR DOOR OPENING:  Bipart 70.6” | Single Slide: 46.4”
HEADER SIZE: 8” (203mm) High x 6” (152mm) Deep
JAMB DIMENSION: 1 3/4” x 4 1/2” Option: 1 3/4” x 6”
STILES: Narrow 2.0” or Medium 4.0"
BOTTOM RAIL: 4" | OPTION: 6", 8", 10", 12"
TYPICAL DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)
MAXIMUM PANEL WEIGHT: Up to 400lb (With Heavy Duty Option)
POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum | OPTION: Uninterrupted Power Supply
DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
CONTROLLER: Microprocessor Based, Safety Logic
ACTIVATION SENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional)  | OPTIONAL: Mats, Wallplates, Radio Control
SAFETY SENSORS: 1 Stan-Guard® and Doorway Holding Beam
LOCKING: 5-point, Electric Solenoid Lock (Fail Safe/Fail Secure), Surface or Recessed Panic Hardware, Lock Guard, Armored Strike
SECURITY OPTIONS: Alarm Contacts for remote monitoring of panel status, Security Strobes for theft deterrence
CAMERA OPTIONS: Jamb Camera, Stan Camera
GLASS STOPS: 1/4", 1"  | 9/16" Impact Glass
MUNTINS: One 2" | OPTION: 4 1/4"
THRESHOLD: Configurable Options
TRANSOM: Optional on Non Impact package only
CODES AND STANDARDS: ANSI A156.10, NFPA 101, UL, cUL, ICBO, BOCA, Florida Building Code, Miami-Dade County NOA Code Compliance, ASTM E283

* All Specifications are subject to change. Please contact your local sales representative to ensure accuracy.

No Illustration Description Type Model PDF DWG BIM/Revit
2.01 2.01.png Dura-Storm Impact Bi-Part 2000 2.01_DS20-BP-IMP.pdf 2.01_DS20-BP-IMP.dwg Dura-Storm BIM Model.zip
2.02 2.02.png Dura-Storm Impact Single Slide 2000 2.02_DS20-SS-IMP.pdf 2.02_DS20-SS-IMP.dwg
2.03 2.03.png Dura-Storm Impact Bi-Part 3000 2.03_DS30-BP-IMP.pdf 2.03_DS30-BP-IMP.dwg
2.04 2.04_DS30-SS-IMP.PNG Dura-Storm Impact Single Slide 3000 2.04_DS30-SS-IMP.pdf 2.04_DS30-SS-IMP.dwg
2.05 2.05.png Dura-Storm Non-Impact Bi-Part 2000 2.05_DS20-BP-N_IMP.pdf 2.05_DS20-BP-N_IMP.dwg
2.06 2.06.png Dura-Storm Non-Impact Single Slide 2000 2.06_DS20-SS-N_IMP.pdf 2.06_DS20-SS-N_IMP.dwg
2.07 2.07.png Dura-Storm Non-Impact Bi-Part 3000 2.07_DS30-BP-N_IMP.pdf 2.07_DS30-BP-N_IMP.dwg
2.08 2.08_DS30-SS-N_IMP.PNG Dura-Storm Non-Impact Single Slide 3000 2.08_DS30-SS-N_IMP.pdf 2.08_DS30-SS-N_IMP.dwg
2.09 2.09_DS20-BP-SR_IMP.PNG Dura-Storm Impact Steel Reinforced Bi-Part 2000 2.09_DS20-BP-SR_IMP.pdf 2.09_DS20-BP-SR_IMP.dwg
2.10 2.10.png Dura-Storm Impact Steel Reinforced Bi-Part 3000 2.10_DS30-BP-SR_IMP.pdf 2.10_DS30-BP-SR_IMP.dwg
2.50   Dura-Storm Threshold Options   2000/3000 2.50_DS20-DS30-THLD.pdf 2.50_DS20-DS30-AC.dwg
2.60   Dura-Storm Access Control Options   2000/3000 2.60_DS20-DS30-AC.pdf 2.60_DS20-DS30-AC.dwg
2.70   Dura-Storm Transom Options   2000/3000 2.70_DS20-DS30-TRN.pdf 2.70_DS30-BP-N_TRN.dwg