STN_rush_cmyk-WEB.png

 

500.jpg

 

500 FOUR WING MANUAL REVOLVING DOOR 
Differentiation:

  • Surface mounted to the finished floor so it is retrofit-ready and  easy to install
  • The over-head speed control will provide many years of trouble free service
  • Sizes up to 8' in diameter

 

 

15002.jpg

 

1500 THREE- OR FOUR-WING MANUAL REVOLVING DOOR
Differentiation:

  • Fully custom revolving door to accommodate various sizes and finishes
  • Full framed and features narrow stiles fully weather stripped and integrated to a fluted metal clad center shaft
  • Patented door wing collapsing mechanism and bearing concealed below the floor and within the canopy ceiling makes the stile to rail connection crisp and clean

 

 

 

2500.jpg

 

2500 THREE- OR FOUR-WING MANUAL REVOLVING DOOR
Differentiation:

  • All glass look”- no door stiles, curved enclosure, base rails are recessed with curved glass glazed flush to the floor.
  • Enclosure base rails are recessed into the floor
  • Upper and lower collapsing mechanisms are concealed and directly connected to door rails

 

 

 

 

    3500.jpg

     

    3500 THREE- OR FOUR-WING MANUAL REVOLVING DOOR

    Differentiation

    • “All glass” - no door stiles curved enclosure base rails are surface mounted to the floor.
    • Upper and lower collapsing mechanisms are concealed and directly connected to door rails
    • Overhead speed control in canopy or floor mounted for all glass design.

     

     

     

     

    3500AG_2.jpg

     

    2500AG AND 3500AG ALL GLASS THREE- OR FOUR-WING MANUAL REVOLVING DOOR
    Differentiation:

    • Features a glass canopy, and glass drum walls 

     

     

     

    4500_2.jpg

     

    4500 SERIES THREE-WING MANUAL SECURITY REVOLVING DOOR 
    Differentiation

    • Provides rapid, simultaneous two-way passage for authorized personnel
    • tempered glass meets most security criteria
    • ruggedly constructed with few moving parts to provide trouble-free operation with minimum maintenance

     

     

     

    Manually Operated Revolving doors must be equipped with a speed regulator to prevent the door from rotating faster than the following speeds. Refer to ANSI Standard A156.27 for industry accepted door speeds.

    • 6’6” inside diameter – 12 RPM

    • 7’0” inside diameter – 11 RPM

    • 8’0” inside diameter – 10 RPM

    • 8’6” inside diameter – 9 RPM

    For more information regarding STANLEY Rush revolvers, manual doors and custom entrance systems, contact: 

    888-301-5407 | e-mail estimating | e-mail sales | e-mail general questions