The Dura-Shield was developed in partnership with Insulgard® Security Products to provide protection from ballistic (projectiles in flight) attacks. It provides solid performance, security and safety in a single system. It is ideal for buildings where sliding automatic entrances are required to protect high-risk areas.


  • Ballistic-resistant glass, supplied by Insulgard® Security Products, meets UL® 752 Level 1-3 Certification 
  • Door panels constructed of heavy-duty aluminum-extruded 2 ½" x 6" (63.5mm x 152.4mm) framing
  • Door stiles assembled with threaded rods and clips, providing additional strength

All door packages are custom manufactured to fit your job requirements up to ¼” increments.  For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

Ballistic Resistant

Dura-Shield Ballistic Architectural Specifications (3 Part)

DESIGN: Bi-Part, Single Slide or Swing
BREAKOUT: Sliding Panel Only | OPTION: Hydraulic Closer/Magnetic Latch for Automatic Return from Breakout 
FINISH: Clear or Dark Bronze Anodized | Special Finishes Available
CLEAR DOOR OPENING: Bipart: 68 5/8” | Single Slide: 36 1/16” to 42 1/16”
HEADER SIZE: 11” (279mm) High x 8 7/8” (227mm) Deep
BOTTOM RAILS: 8 1/2" | OPTION: 2 3/4"
MAXIMUM SIZES: Single Slide: 10’ 0” (3.0m) x 8’ 0“ (2.4m) | Bi-Part: 14’ 0” (4.3m) x 8’ 0“ (2.4m)
TYPICAL DOOR PANEL WEIGHT: Up to 500 pounds (227kg) each
DRIVE SYSTEM: Two 1/4 HP DC Motors
CONTROLLER: Microprocessor based, safety logic, position encoder, and user programmable interface
ACTIVATION SENSORS: 2 STANLEY SU-100 motion sensors,
SAFETY SENSORS: Stan-Guard™ presence sensor and dual doorway holding beams
BATTERY BACKUP: Optional UPS Battery -Back-Up System (Up to 1.5 Hours Supplemental Power) or  Fly-Open Box  (One-time Emergency Open)
LOCKING: Optional Solenoid Lock (Electronic Locking System) or  Rotary Key Switch (Secure Door Controls)
CODES AND STANDARDS: UL®, cUL, ANSI A156.10, NFPA 101, UL 752-Level 3 Rating (Standard for Bullet Resisting Equipment)

* All Specifications are subject to change. Please contact your local sales representative to ensure accuracy. 

No Illustration Description Type Model PDF DWG BIM/Revit
2.20 2.20_DSH-BP.PNG Dura-Shield Ballistic/Blast Series Bi-Part   2.20_DSH-BP.pdf 2.20_DSH-BP.dwg Dura-Shield BIM Model.zip
2.21 2.21_DSH-SS.PNG Dura-Shield Ballistic/Blast Series Single Slide   2.21_DSH-SS.pdf 2.21_DSH-SS.dwg