RushLogoOfficialWEB.png

Revolving doors must be equipped with a speed regulator to prevent the door from rotating faster than the following speeds. Refer to ANSI Standard A156.27 for industry accepted door speeds.

Power Assisted or Automatic Revolving Doors

• 8’0” inside diameter – 7.2 RPM

• 9’0” inside diameter – 6.4 RPM

• 10’0” inside diameter – 5.7 RPM

• 12’0” inside diameter – 4.8 RPM

1500a2.jpg

 

1500A THREE-WING AUTOMATIC REVOLVING DOOR

The STANLEY Rush 1500A Revolving door is the automatic version to our 1500 Revolver. It is available as a three-wing design. Various canopy heights (over 12”) of the doors are available to suit any design requirement. This revolver is fully framed and features narrow 1 9/16" (40mm) stiles fully weather stripped and integrated to a solid stainless steel center shaft. Our patented door wing collapsing mechanism and bearing  is concealed below the floor and within the canopy ceiling, so the stile to rail connection is crisp and clean. 

 

 

 

4900ASR-Revolver.jpg

 

4900 ASR AUTOMATIC FOUR-WING SECURITY REVOLVING DOOR

The STANLEY Rush 4900 ASR provides anti-tailgating and optional anti-piggybacking detection through the use of Time-of-Flight (TOF) technology. This anti-piggybacking detection is achieved through the self-contained infrared light sources and camera capturing the reflected light. An internal processor measures the time of reflected light and creates a depth image to analyze the objects within the revolving door. This allows the built-in processor to determine if one or two persons have entered into the security revolving door. The processor compares the images with image stored in memory to detect security violations.

 

For more informaiton regarding STANLEY Rush revolvers, manual doors and custom entrance systems, contact: 

888-301-5407 | e-mail estimating | e-mail sales | e-mail general questions